why cedar
Back
why use western red cedar?
characteristics & properties of western red cedar
benefits of real cedar
real cedar history
real cedar certification
sustainability & the environment
biophilia
forestry facts
why use yellow cedar?
products
Back
siding
Back
introduction
design & spec
prep & install
finish & maintain
siding profiles & trim
decking
Back
introduction
design & spec
prep & install
finish & maintain
deck projects
outdoor
Back
introduction
design & spec
prep & install
finish & maintain
fences
indoor
Back
introduction
design & spec
prep & install
finish & maintain
indoor projects
timbers
Back
introduction
design & spec
prep & install
finish & maintain
diy projects
membership
Back
our members
Back
executive members
retailers
partners
tertiary manufacturers
certified cedar distributors
certified cedar distributors – usa
certified cedar distributor – canada
architects
international associates
why become a member?
membership levels
membership benefits
membership faq
join the wrcla!
member support
resources
Back
gallery
videos
blog
documents
Project of the Week – Tree House

Location: Austin, Texas
Architect: Matt Fajkus Architecture
Design Team: Travis Cook, Matt Fajkus, AIA, David Birt
Design Support: Thomas Johnston
Photography: Brian Mihealsick, Bryant Hill & Allison Cartwright from Twisted Tours

As any proud local will tell you, “Keep Austin Weird” is an especially fitting motto for the 78704 area. Walk down these tree-lined streets and you’ll find no shortage of gratuitous art, live music, funky boutiques and of course exciting architecture. A great example of the latter is the Tree House; a two-story spec project designed for an “imaginary future client” and made to form a symbiotic relationship between the indoor and outdoor spaces.

The man tasked with making it so was architect Matt Fajkus. His challenge? A large oak tree growing in the middle of the property. His muse? A large oak tree growing in the middle of the property.

Matt-Fajkus-MF-Architecture-Tree-House_Exterior-Rear-Photo-Allison-Cartwright-Twist-Tours

“We chose to work with it, and not against it,” explains Fajkus. “We designed the home intentionally around the tree, and carefully considered how each room of the home reacts to the site and this preserved tree in the courtyard.”

Matt-Fajkus-MF-Architecture-Tree-House_Master-2-Photo-Brian-Mihealsick

In addition to honoring the stoic oak, the other main objective was to create a balance of sophistication and restraint. The MF Architecture team did this by pulling together a crisp composition of carefully considered building materials including Western Red Cedar T&G siding and soffits – some of which he painted a neutral grey and some of which he applied a clear finish for an au naturel look.

Matt-Fajkus-MF-Architecture-Tree-House_Event-Photo-Bryant-Hill

“We also used cedar in the master bedroom ceilingand at the balcony overlooking the front yard,” says Fajkus. “The fences and gates were also made of cedar.”

For these exposed portions of wood, MF Architecture chose a beautiful select knotty grade of cedar – a wise choice, according to Fajkus, for several reasons.

Matt-Fajkus-MF-Architecture-Tree-House_Master-Porch-Photo-Brian-Mihealsick

It’s a readily available, cost-effective natural material that’s both equally attractive in its natural finish as well as painted,” he says, adding, “The knots in this case added a desired texture and contrast to the clean and minimal massing of the white stucco on the house. In terms of composition, the wood provides a warmth and richness that complements the concrete floors, stucco volumes, and clean-lined geometry of the overall massing of the home.”

Matt-Fajkus-MF-Architecture-Tree-House_Master-Bath-Photo-Brian-Mihealsick

WRC Specifications
Grade: KD, A&Btr clear WRC & KD, Select Knotty WRC
Size: 1 x 6 T&G
Fastening: Stainless steel finish nails
Applied Finish: Clear finish

Model

© 2026 All rights reserved
Gatsby Website Development by Jambaree

Image Gallery